N_031.mp4 Online

: Ensure the hoist limit switch stops the winch before the hook hits the boom tip.

: Check the angle display at 20°, 45°, and 70°. The display must be within ±0.5 degrees of the inclinometer reading. n_031.mp4

: Fully retract the boom. Turn the potentiometer counter-clockwise until it stops to reset the "zero" point. : Ensure the hoist limit switch stops the

These sensors transform hydraulic pressure into electrical signals to calculate load. n_031.mp4

: Reconnect hoses and bleed the air from the hydraulic lines to ensure accurate readings. ⚠️ Critical Safety Checks