Drift-zone-installation-tutorial -

: Attach the fence so there is a 5-inch gap between the bottom of the mesh and the ground. This prevents the fence from being buried too quickly.

: These are often too weak for heavy snow loads; stick with steel T-posts. drift-zone-installation-tutorial

: For long runs, use support wires to stabilize the end posts and keep the line tight. Quick Tips for Success : Attach the fence so there is a

: Space your posts 5 to 8 feet apart . In high-wind areas, closer spacing (5 feet) is better. Drive posts approximately 1.5 to 2 feet deep to ensure stability. : For long runs, use support wires to

A properly installed snow fence creates a "drift zone" by slowing down wind and forcing snow to drop before it reaches your driveway or road.

: Pull the fencing taut and secure it to the upwind side of the posts using 3 or 4 zip ties per post.

Since "drift zone" can refer to a few different things depending on your needs, I’ve drafted a versatile tutorial for the most common physical installation: . If you were looking for a digital guide (like setting up drift zones in a video game) or a mechanical guide (for RC car tracks), let me know! Tutorial: How to Install a Snow Drift Zone (Fencing)