Get it onGoogle Play
PRACTICE SMART. PLAY HARD.™
PRACTICE SMART. PLAY HARD.™
PRACTICE SMART. PLAY HARD.™
PRACTICE SMART. PLAY HARD.™
Combine with or DR 4071 in a 10:1 mixing ratio by volume.
This metallic lacquer is designed for interior fittings, furniture, and decorative glass. For best results, follow these application guidelines:
: Use a soft duster for dry cleaning or a slightly dampened microfibre cloth for deeper cleaning. Combine with or DR 4071 in a 10:1 mixing ratio by volume
: Use a cup gun with a small nozzle size between 1.2 mm and 1.5 mm . Mixing :
: Do not apply too wet, as this can ruin the uniform metallic effect. : Use a cup gun with a small nozzle size between 1
: Do not use harsh household cleaners or abrasive substances, as they will damage the metallic finish.
: This is a fast-drying system. For gold and copper tones (GD/CU series), use thinner coats (50–70 g/m²) to maintain brilliance. Maintenance of the Finished Piece : This is a fast-drying system
Add (DV 4900 for small areas, DV 4994 for large areas) depending on your desired effect.
Combine with or DR 4071 in a 10:1 mixing ratio by volume.
This metallic lacquer is designed for interior fittings, furniture, and decorative glass. For best results, follow these application guidelines:
: Use a soft duster for dry cleaning or a slightly dampened microfibre cloth for deeper cleaning.
: Use a cup gun with a small nozzle size between 1.2 mm and 1.5 mm . Mixing :
: Do not apply too wet, as this can ruin the uniform metallic effect.
: Do not use harsh household cleaners or abrasive substances, as they will damage the metallic finish.
: This is a fast-drying system. For gold and copper tones (GD/CU series), use thinner coats (50–70 g/m²) to maintain brilliance. Maintenance of the Finished Piece
Add (DV 4900 for small areas, DV 4994 for large areas) depending on your desired effect.